Co-Supervisor Profile

Dr MA Gafur

Principal Scientific Officer


01711704363
d_r_magafur [@] yahoo.com



Nationality

Bangladeshi


Joining Date

1995-03-09


Institution

Bangladesh council of Scientific and Industrial Research (BCSIR)


Highest Degree

PhD


Division

Pilot Plant and Process Development Center (PP&PDC)


Expert Area

Metallurgical Engineering


Qualifications

Degree

Group/Department

Board/University

Passing

Year

Result

(Division/GPA/CGPA)

Distinction

PhD

Metallurgical Engineering

BUET

1999

3.125 out of 4; Satisfactory

 

MSc Engg.

Metallurgical Engineering

BUET

1989

3.08 out of 4.0; Satisfactory

 

BSc Engg.

Metallurgical Engineering

BUET

1988

2ndDivision

 

HSC

Science

Jessore

1982

1stDivision

Math

SSC

Science

Jessore

1980

1stDivision

Chemistry, Religion

Experience & Achievement

 

Training Information

Type

(Local/Foreign)

Title

Institution

Country

Start Date

End Date

Grade

Position

Local

Management  of Technological Recourses and Capabilities for Competitive Edge

IAT, BUET

Bangladesh

21.11. 2000

23.11.2000

 

 

Local

Composite Materials

Bangladesh Society of Mechanical Engineering

Bangladesh

29.1.2001

30.01.2001

 

 

Foreign

Computer Hardware and Network

CMC ltd

India

6.1.2003

280.3.2003

 

 

Local

Method Validation, Traceability, External and Internal Quality

Bangladesh Accreditation Board

Bangladesh

9.3.2016

10.03.20016

 

 

Local

Assessor Training Course on 17025:2005

Bangladesh Accreditation Board

Bangladesh

14.02.2016

14.02.2016

 

 

Local

Extraction of Metals

MME Dept., BUET

Bangladesh

09.05.2010

16.05.2010

 

 

Foreign

Nano-Technology

School of Material Science and Engineering, IIEST

India

18.06.2018

08.07.2018

 

 

Local

Solar Photovoltaic (PV)   Energy Technology

IFRD, BCSIR

Bangladesh

13.09.2015

16.09.2015

 

 

Foreign

TMA/SS6300,

SII Nano Technology, Tokyo

Japan

07.11.2011

11.11.2011

 

 

Foreign

Induction Furnace, Induction Hardener, and Centrifugal Casting Unit

Topcast Engineering, Arrezzo.

Italy

02.04.2012

08.04.2012

 

 

Foreign

Research Facility on Biomaterials and Implant

IEEST, Howrah, WB

Institute of Biomedical Engineering,Kolkata

NML, Jamshedpur

Sree Chitra IMST, Trivandrum

India

30.01.2012

08.02.2012

 

 

Foreign

Optical Emission Spectrometry

Oxford Instrument Analytical GmbH

Germany

25.11.12

30.11.12

 

 

Developed Process

S/N

Year of Acceptance

Description (including reference)

DP-1

 

Production of automobile spares (Piston pin)

DP-2

 

Production of Refractory Bricks from Rice Husk

DP-3

 

Production of Bearing Materials

 

DP-4

 

Production of Cloth Maker

DP-5

 

Production of Protein Rich Meal

 

DP-6

 

Production of HAP from Fish Scale

 

DP-7

 

Production of Lead (Pb) free Tin based solder for electronic application

 

DP-8

 

Recovery of Rutile mineral from used welding rod

 

DP-9

 

Pilot Plant Study for the production of Hydroxylapatite by Wet Chemical Method", accepted by the office, Member Development, BCSIR, Dhaka.Date: 02.10.17.

 

DP-10

 

A process for the production of hydroxyl apatite (HAP) from fish bone", accepted by the office, Member Development, BCSIR, Dhaka.Ref No: 39.02.0000.043.37.086.17/342 ,  Date: 27.11.17.G

 

DP-11

2018

Design and Fabrication a single roller magnetic separator

Dp-12

2018

The Process for production of aluminum base lubrication grease

Patent/Copyright

S/N

Year of Acceptance

Description (including reference)

P-1

2014

Dr. AJMT Nigar and Dr. Abdul Gafur, "Improved method for manufacturing of red oxide from mill scale", Patent Serial No. 1005482, accepting date. 27.1.14.

 

P-2

2018

Dr. Mohammad Nazim Zaman, Md. Aminur Rashman,  Prodip Kumar Bishwas, Dr. Abdul Gafur, Recovery of rutile mineral from ARC electrode waste", Ref, Patent No. 77/2017/3147, dt. 05.09.2018.

 

Method Validation

S/N

Year of Acceptance

Description (including reference)

M-1

2017

Tensile Strength of Metals

Award/Grant

S/N

Year

Description (including reference)

1

1996

Awarded for best presentation under Sec XII, Jahangirnagar University, Savar, Dhaka, Bangladesh, 29-31 October, 1996.

2

2015

Awarded as Best Poster In the Poster Session at ICPSDT-2015

3

2015

Special Allocation of MOST, GOB, A Study of The Fabrication And Characterization of Bio-Degradable PCB

4

2017

Special Allocation of MOST, GOB, Leaching of Metals (Tin Aluminium, Lead, Copper) from E-Waste (Mobile Phone PCBs)

 

 

Publication & Research

 

Journal Article

S/N

Publishing Year

Description

JA-1

1993

M. A Gafur and M. Nasrul Haque, Effect of Particle Size and Percentage of Sawdust on their Properties of Light Weight Insulating Bricks, Trans. of the Indian Ceramic Society, Vol. 52 (5), Sept- Oct 1993, p.163

JA-2

1994

M. A. Gafur and M. Nasrul Haque, Numerical Treatment of Solidification of Casting, Journal of Institute of Engineers of Bangladesh, Vol. 22, No. 2, April 1994, p.7.

JA-3

1997

M. A. Gafur and M. Nasrul Haque, Computation of Solidification Time of Aluminium in Cast Iron Semi-infinite Mould Considering Imperfect Contact between Casting and Mold, J. IEB, Mech. Engg. Div. Dec. 1996-June 1997, vol. Me 25-26, No. 1, p. 44.

 

JA-4

1998

M. A. Gafur and M. Nasrul Haque, Analysis of Heat Transfer at Metal-Mold Interface and Computer Simulation of Al Casting, Bangladesh Journal Of Science and Industrial Research., 33(2) 1998, p. 218-227.

 

JA-5

1999

M. A. Gafur and M. Nasrul Haque, Computation of Solidification Time of Copper in Cast Iron Mold  Considering Imperfect  Contact between casting and Mold, Bangladesh J. Sci. Ind. Res. 34 (1) 1999, p. 27.

 

JA-6-10

2002-2005

M. A. Gafur and M. Nasrul Haque, Computation of Solidification Time of Zinc  in Cast Iron Semi-Infinite  Mold Considering Imperfect Contact Between Casting and Mold, Science, Technology, and Development ,Vol. 1 No. 1, June 2002, p. 85.

M. A. Gafur and M. Nasrul Haque,   and Deena Ferdous, Computation of Solidification Time of Aluminium in Semi-infinite Sand Mold Considering Imperfect Contact Between Casting and Mold, Bangladesh J. Sci. Ind. Res. 37 (1-4), p.159, 2002.

M. A. Gafur, M. Nasrul Haque, and K. Narayan Prabhu, Effects of Chill thickness and superheat on casting/chill interface heat transfer during solidification of commercially pure al casting, Journal Of Materials Processing Technology 133 (2003). P. 257.

M Mariruzzaman, M H Rahman, SM Hafizuddin, and MA Gafur, Manufacture of  Bio Degradable Polymer Composites, Textile Asia October 2005, p. 30.

S. Mojura Haque, M. A. Hakim,  F. A.  Khan, and M A Gafur, Nano-crystalline Structure formation in Fe73.5Cu1Ta3Si13.5B9 Alloy Studied by Differential Thermal Analysis, Thermo-gravimetric Measurement, and X-Ray Diffraction,  Nuclear Science and Application, Vol.14 No. 1 June 2005, p. 61.

 

JA-11-15

2006-2007

M. N. Islam, M. A. Gafur and A H Khan, Hot Pressed Compression Molding of PP reinforced with Short Jute Fiber, Jahangir Nagar University Journal, vol. 29, 9-18, 2006,p.9.

M Mariruzzaman, M H Rahman, SM Hafizuddin, and MA Gafur, The Propertiers of Agave Cantala Natural Fiber Proprolylene Composites, Asian Textile Journal, July 2006, p. -61. I

S. Monjura Haque, M. A. Hakim,  F. A.  Khan, and M A Gafur, Structural Characterization and Thermo-gravimetric Measurement of Fe73Cu1Nb3.5Si14B8.85, Nuclear Science and Application, Vol.15, No. 2, December 2006, p. 75.

MN Islam, MA Gafur, and AH Khan, Hot Pressed Compression Molding of Polypropylene Reinforced with Short Jute Fibers, Jahangir Nagar University Journal Science, Vol. 29, p.9, December 2006.

MN Islam, MA Gafur, and AH Khan, Ultra Violet-Visible Spectroscopic Investigation of Short Banana Fiber Reinforced Polypropylene Composites, Jahangir Nagar University  Journal of Science, Vol. 30, No.1, 47-53, June 2007.

JA- 6-20

2007-2008

M. Nazrul Islam, M. A. Gafur, A.B.H.O Islam and A H Khan, Fabrication and Investigation of the AC Electrical Properties of Pure Polypropelen (PP) and Polyproplylene -Banana (PP-b) Composites, Bangladesh Journal of Physics, 3 65-74 , 2007.

MN Islam, MA Gafur, and AH Khan, Development, Structure and Strength Properties of PP/Jute Blends, Jahangir Nagar University  Journal of Science, Vol. 30, No.2, 89-106, December 2007.

MN Islam, MA Gafur, and AH Khan, Development, Structure, and Strength Properties of PP/Jute Blends, Jahangir Nagar University Journal of  Science, Vol. 30, No. 2, p. 89, December 2007.

M. Nazrul Islam, M. A. Gafur, A.B.H.O Islam and A H Khan,  Fabrication, and Investigation of AC Electrical Properties of Pure Polypropylene and Propylene-Banana Fiber Composites, Bangladesh Journal of Physics, Vol. 3, (1), p. 65, 2007.

MN Islam, MA Gafur, and AH Khan, Natural Fiber-Propylene (PP-Banana) Matrix Composites-Fabrication and Study of Mechanical properties, Jahangir Nagar University,  Journal of Physics, Vol. 30, No. 2, p. 89, 2008.

 

JA-21-25

2008-2009

M. Maniruzzaman, Md. Minhazul Haque and  M A Gafur, Properties of Pulque fiber reinforced LDPE Composites, Textile Asia, Vol. XXXIX, June 2008, p. 37. I

M Azad Sohail, A Ismail Mustafa and M Abdul Gafur, Boiller tube failure in natural circulation high pressure drum boiler of a power station, Journal of Scientific & Industrial Research, Vol. 68, January 2009, p. 61.I

Mydul Md. Alam, Toufiq Ahamed, Md. Monimul Haque, M A Gafur and ANM Hamidul Kabir, Mechanical Properties of Natural Fiber Containing Polymer Composites, Polymer-Plastics Technology and Engineering, 48:110-113, 2009.  I

Md. Forhad Mina, Sharmeen Seema, Rummana Matin, Md. Jellur Rahman, Md. Abdul Gafur and Md. Abu Hashan Bhuiyan, Improved Performance of Isotactic Polypropylene/Titanium dioxide composites: Effect of processing conditions and filler content, Polymer Degradation and Stability 94 (2009) 183-188. ( www.elsevier.com /locate/polydegstab). I

Md. Moniruzzaman,  Mohd. Maniruzzaman, MA Gafur and C. Santulli, Lady's Finger Fibres for possible Use as Reinforcement in Composites Materials. Journal of Biobases Materials and Bioenergy, Volume 3, Number 3, September 2009, pp.286-290. I

 

JA-26-30

2009-2010

Md. Forhad Mina, Nasima Banu, Abdur Razzak, Md. Jellur Rahman, Md. Abdul Gafur, and Md. Abu Hasan Buiyan,  Structure and Performance of White Clay-Filled Isostatic-Polypropylene Composites Prepared by Double-Molding Techniques, Polymer-Plastics Technology and Engineering, 48:1275-1281, 2009.  I

Nishat Begam, M A Gafur, A H Buiyan, and D K Das, MgCl2 doped Cu1Zn1-xF2O4 Ferrite humidity sensor, Pysica Status Solidi A, Weily Int. Science, 1-7 (2009).I

M A A Zaman, M Maniruzzaman, B Ahmed, and M A Gafur, Effect of Chemical Modification  on Tensile Propperties of  Paqlue Fibre, J. Of Applied Sciences and Technology Vol, 7  No. 1 June 2010, pp. 105-110.

MAA Zaman, MH Rahman, MZ Hossain, B. Ahmed and MA Gafur, Effect of NaOH on Mechanical Properties of Silk Fiber and Gelatin-Silk Fiber Composites, Vol. 7, No. 2 December 2010, pp. 117-120.

Tanzina Huq, Avik Hasan, M. Saha, Ruhul A Khan, Mubarak A Kahan, and M A Gafur, Comparative Studies on the Mechanical, Degradation and Interfacial Properties between Jute and E glass Finer Reinforced Pet Composites, Polymer-Plastic Technology and Engineering, 49; 1128-1135, 2010.  I

 

JA-31-35

 

Ruhul A Khan, Mubarak A Kahan, Hyder U. Zaman, MZ Mollah, M. Nuruzzaman, Avik Khan, Kamol Dey,  Tanzina Huq, Nazia Noor, Bapi sarker, M. Saha, and M A Gafur, Thermo-mechanical and Interfacial properties of Calcium Alginate Fiber-Reinforced Polypropylene Composites, Polymer-Plastic Technology and Engineering, 49; 325-331, 2010.I

Avik Khan, Tanzina Huq, Nazia Noor, M. Saha, Ruhul A Khan, Mubarak A Kahan, M A Gafur, Effect of Sailane Treatment on the Mechanical and Interfacial properties of Calcium Alginate Fiber-Reinforced Polypropylene Composites, J. of Composites Materials, Online First, Published  on August 27, 2010. I

Md. Forhad Mina, Md. Akramul Haque, Md. Khairul Hasan Bhuiyan, Md. Abdul Gafur,Yukihiro  Tamba, Tsutomo Asano, Structural, Mechanical and Thermal Studies of Double-Molded Isotactic Polypropylene Nanocomposites, With Multiwalled Carbon-nanotubes, J. of Applied Polymer Science,  Vol. 118, 312-319, 2010. I

Mubarak A Khan, Towhidul Islam, M. Arifur  Rahman,  Jahid A. Khan, Ruhul A Khan, M A Gafur M Z Mollah , AKM Alam, Thermal, Mechanical, Morphological Characterization of Jute/Gelatine Composites,   Polymer-Plastic Technology and Engineering, 49; 742-747, 2010. I

Md. Abdul Gafur, Rahima Nasrin, Md. Forhad Mina, Md. Abu Hashan Bhuiyan, Yukihiro  Tamba, Tsutomo Asano, Structure and Properties of the Compression Molded Isotactic-Polypropylene /Talc Composite -Impact of Cooling and Rolling, Polymer Degradation and Stability, 95 (2010), 1818-1825. I

 

JA36-167

2010-2018

Ruhul A Khan, Hyder U. Zaman, Mubarak A Kahan, Farah Nigar, Towhidul Islam, Rafiqul Islam, Suvasree Sahah, M. Mizanur Rahman, A I Mustafa and M A Gafur, Effect of the Incorporation of  PVC on the  Mechanical Properties of the Jute Reinforced LLDPE Composite,   Polymer-Plastic Technology and Engineering, 49; 707-712, 2010. I

Jahangir A Khan, Mubarak A Khan, Rabiul Islam, Abdul Gafur, Mechanical, Thermal and interfacial Properties of Jute Febric-Reiforced Polypropylene Composites:   Effect of Potasium Dichromate, Material Science and application, December 2010. I

Sabrina Sultana,  Ruhul A Khan, Md Sharuzzaman, Mubarak A Khan, A I Mustafa and MA Gafur, Effect of Gamma Radiation on the Physico- and Thermo-mechanical Properties of Gelatin-Based Films Using 2-Hydroxymethyl Methacrylate (HEMA), Polymer-Plastic Technology and Engineering, 49; 662-671, 2010. I

Ruhul A Khan, Mubarak A Kahan, Hyder U. Zaman, Nazia Noor,  Avik Khan, Kamol Dey,  Tanzina Huq, Kamol Dey, Bapi sarker, M. Saha, and M A Gafur, Study on the Mechanical and Thermal Properties of Jute-Reinforced methyl Acrylate Grafted PET composites,  Polymer-Plastic Technology and Engineering, 49; 373-380, 2010.I

Famida  Parvin, Mubarak A Khan, AHM Saadat, M Anwar H khan, Jahid MM Islam, Mostak Ahmed , MA Gafur, Preparation and Characterization of Gamm Irradiated Starch/Poly(Vinyl Alcohol)-Based Blend Films, J. Polym Environ, published on 9 Sep 2011,   19(4): 1013-1022, April 2011. I

Q TH Shubra, AKMM Alam, M A Gafur, SM Samsuddin,Mubarak A Kahn, M. Saha, MA quaiyum, Jahangir A Khan, and Md. A, Shaduzzaman, Characterization of Plant and Animal Based Natural Fibers Reinforced Polypropylene Composites and their Comparative Study, Fibers and Polymers 2010, Vol. 11, No. 5, 725-731. I

Q TH Shubra, AKMM Alam, Mubarak A Kahn, M. Saha, Dipti Saha, M A Gafur, Study On The Mechanical Properties, Environment Effect, Degradation Characteristics, And Ionizing Radiation Effect on Silk Reinforced Ploypropylene/Natural Rubber Composites, Composites; part A 41 (2010)1587-1596.   I

A H Bhuiyan, M. F. Mina, M  M Khan , Md. Jillur Rahman, and M Abdul Gafur, Structural, Elastic And Thermal Properties Of Titanium Dioxide Filled Polypropylene, J. Polym Res. (2011) 18: 1073-1079. I

Mohd. Kabir Hossain, F. Ahmed, MA Gafur and AH Khan,  Effect of Alkali Treatment Of Palm Fibers On Its Physical And Mechanical Properties, Journal of Science, Vol. 34, No. 2, , 2011, PP. 37-47. I

Md. Forhad Mina, Md. Akramul Haque, Md. Abdul Gafur, and Tsutomu Asano, Effect Of Rolling Deformation On The Structure, And Properties Of Multi-Walled Carbon Nano-Tubes  Filled Isotactic Polypropylene, Weilyonline Library: 15 November 2011. I

GM Arifuzzaman Khan, SR Shariar Hossain, M Samsul Slam, AK Chokraborty, MA Gafur, M Terano, Isolation And Charecterization Of Betel Leaf Fiber: Its Potential, Application In Making Composites, Polymer Composites, Volume 33, issue 5, May 2012. P.764-774. I

GM Arifuzzaman Khan, SM Alam Sams, Md R. Kabir,  MA Gafur, M Terano, M S.Alam, Influence Of Chemical Treatment On The Properties Of Banana Stem Fiber/Coir Hybrid Reinforced Maleic Anhydride Grafted Polypropelene /Lowdensity Ployethelene Composites, J. App. Polymer Science, Vol. 128, issue 2, 15 April 2013. P? I

Afrin Jahan, M. Mahbubur Rahaman, Humayun Kabir, Md. Alamgir Hosain, Md. Abul Hossain, and Md. Abdul Gafur, Comparative Study of Physical and Elastic Properties of Jute and Glass Fiber Reinforced LDPE Composites, Int. J.of Scientific & Tech. Research, Vol. 1 issue 10, Nov 2012, P. 68-72. I

Md. Aminul Islam, Dr. Abdul Gafur and Dr. Md. Saidul Islam, Effects of Excess Bi2O3 on The Properties Of La Doped Bismuth Titsnste (Bi4Ti3O12) Ferroelectric Ceramics, AJASE, Vol.1, No. (2012), P. 65-69. I

M A K Phatan, K A M H Siddique, S Alam, O Islam, and M A Gafur, Structural and Optical Characterization of CdS and CdHgTe  for the Fabrication of /CdHgTe/CdS structure, Journal of Materials Science: Materials in Electronics.J. Mater Sci:Mater Electron (2013), 24: 745-751. I

Marufa Naznin, Md. Zainul Abedin, Mubarak a kahn, and Md. Abdul Gafur, Influence of Acacia Catechu Extracts, And Urea And Gama Irradiation on The Mechanical Properties of Satrch/PVA  Based Materials, Polymer Science, Volume 2012, article ID 348685, 8 pages. I

Md. Yeathad Hossan, Md. Ashraful Islam Molla, Md. Shahidul Islam, Ashequl Alam Rana, Md. Abdul Gafur and Mohammad Mainul Karim; Fabrication and Characterization of Polyvinyl Alcohol-Hydroxyappatite Biomimetic Scaffold by Freeze Thawing in Situ Synthesized Hybrid Suspension for Bone Tissue Engineering, Int. journal of Emerging Technology and Advanced  Engineering, Volume 2, issue 12, December 2012 p.669-700. I

M M Rahman AJMT Negar, M A Gafur, and ASW Kurny, Studies on the Preparation of Lead (II) Chloride from Galvanizing Plant Waste, Bangladesh J. Sci. Ind. Res. 47(4), 415-420, 2012.

Tanveer Mehdi Adyel, Syed Hafizur Rahamn, S M. Nazrul Islam, , Hossain  M. Syem, Mala Khan, and  Md. Abdul Gafur, Characterization of  Brick making Soil : Geo-engineering , Elemental and Thermal Aspects, Jahangirnagar University Journal of Sceince, Vol. 35, No. 1, pp. 109-118, June 2012.

M. Maniruzzaman, M A Rahman,  M A  Gafur, H. Fabritius, and D. Raabbe, Modification of pineapple leaf fibers and graft copolymerization of acrylonitrile onto modified fibers, Journal Composites Material January 2012, vol. 46, No1, 79-90. I

Tanveer Mehdi Adyel, Syed Hafizur Rahamn, S M. Nazrul Islam, Hossain  M. Syem, Mala Khan, Md. Abdul Gafur, Md. Maniruzzaman, and Md. Mahbubur Rahman Bhuiyan,  Characterization of Electrocoagulated metal hydroxide sludge (EMHS) from textile industry by EDXRF, TG/DTA, SEM technique, International Journal of Industrial Chemistry. ?? I

M A Mohshin Qurasshi, AKM Akter Hossain, M A Gafur, Structural and Physical Properties of Cu0.12Mn0.88Fe2O4 Prepared by Combustion Technique, Int. Journal of Science and Research (IJSR), India Online ISSN :2319-7064, Volume 2 Issue 2, February 2013, 274-276. I

Rajia Sultana, Rafia Akter,  Md Zahangir Alam, Md. Rakibul Qadir, M H Ara Begum, Md. Abdul Gafur, Preparation and Characte/rization of Sand Reinforced Polyester Compostes, Int. Journal of Engineering & Technology, IJET-IJENS Vol:3, No: 02, p.111, April 2013.I

Rafia Akter,  Rajia Sultana, Md Zahangir Alam, Md. Rakibul Qadir, M H Ara Begum, Md. Abdul Gafur, Fabrication and Characterization of Woven Natural Fiber Reinforced Polyester Compostes, Int. Journal of Engineering & Technology, IJET-IJENS Vol:3, No: 02, p.122, April 2013.I

U K Sultana, Fahmida Gulshan, MA Gafur and ASW Kurny, Kinetics of recovery of Alumina from Aluminium Waste through Fusion with Sodium hydroxide, Am. J. of Materials Engineering and Technology, 2013, Vol. 1 No. 3, 30-34. I

Md. Khairul Hasan Bhuiyan, Md. Mahbuburb Rahman, Md. Forhad Mina, Muhammad Remanul Islam,  Md. Abdul Gafur, Afia Begum, Crystalline morphology and properties of multi-ewalled carbon nanotube filled isotactic polypropylene nano composites: Influence of filler size and loading, Composites: Part A 52 (2013) 70-79. I

Shimul Kanti Nath, Deba Prashad  Paul, Sanjoy Kumar Nandi, Md. Abdul Gafur, and Md. Shahjajahan,  Structural and Optical Charecterization of Cobalt Doped ZnO Thin Film Deposited by Spray Pyrolysis Method, IJETCAS, p. 125(www.iasir.net), 2013. I

Hasan Ahmed, Menhaz Rashid, Mahbubur Rahman, Mohammad A Jalil Miah, Klaus Tauer, Mohammad Abdul Gafur,  Surface Modification of  temperature-responsive polymer particles by electrically polyaniline shale layer, Wiley Online Library, Polym Int. 2013, www.soci.org, published on 28 May 2013. I

T. Al-Mubarak, M F Mina, and M A Gafur, Material properties of Acetylated Jute-mat Composites, J of Sci Res 5(1), 13-23(2013).

M. Azizar Rahman, M A Gafur and AKM Akhter Hossain, Structural, magnetic and transport properties of magneto-electric composites. Journal Magnetism and magnetic materials345 (2013)89-95. I

Manirul Hasan, Sujan Kumar das, Jahid M M Islam, Md. Abdul Gafur, Enamul Haque, Thermal Properties of Carbo Nanotube Reinforced Polyvinyl Alcohol (PVA) Composites, International Letter of Chemistry, Physics and Astronomy,12(2013) 59-66. I

Sujan Kumar Das, Jahid MM Islam, Monirul Hasan, Humayin Kabir, Md. Abdul Gafur, Enamul Hoque, Mubarak A Khan, Effects of SiO2 on thermal and Optical Properties of  Na-Alginate/TiO2/SiO2 Composite thin film, European, J. Of Applied Physics Vol. 11, 2013, p.10-17. I

Sujan Kumar Das, Jahid MM Islam, Monirul Hasan, Humayin Kabir, Md. Abdul Gafur, Enamul Hoque, Mubarak A Khan, Development of Electrically Conductive Nanocrystalline Thin Film for Optoelectronic Application, Int. Letters of Chemistry, Physics and astronomy, 10(1)(2013) 90-101. I

Tanveer Mehdi Adyel, Syed Hafizur rahamn, Mohammad Moniruz Zaman, H. M. Syem, Mala Khan, Md. Abdul Gafur, and Md. Nazrul Islam, Reuse Feasibility of Electrocoagulated Metal Hydroxide Sludge of Textile Industry in the Manufacturing of Building Blocks, J. of Waste Management, Vol. 2013, Article ID 686981, 9 pages, (http://dx.doi. Org/10.1155/2013/686981). I

M A Rahaman, M A Gafur and ASW Kurny, Kinetics of Recovery of Alumina from Coal Fly Ash ythrough Fusion with Sodium Hydroxide, American Journal of Materials  Engineering and Technology, V0l. 1, No. 3, p. 54-58, 2013. I

S. Alam,M A K Phatan, ABMO Islam, M A Gafur, SK Shaha, M Mori, T Tambo, Optical and Structural Characterization of CdSe and CdTe  layers and fabrication of  CdTe/Cde structure, Int. Journal of  Light and Electron Optics, 2013, 124, 15, 2165-2170. I

Md. Saiful Islam, Mohammad Mizanur Rahman, Md. Abdul Gafur, Ahmed I. Mustafa, Mubarak A. Khan, Preparation and Characterization, of Cellulose, -gelatin nanocomposite isolated from jute for biomedical application, Materials Science, MSAIJ, 11(3), 2014,pp. 105-112. I

Afrin Jahan, M. Mahbubur Rahaman, Humayun Kabir, Md. Alamgir Hosain, Md. Abul Hossain, and Md. Abdul Gafur, Electrical and Thermal Properties of Jute and Glass Fiber Reinforced LDPE Composites, Int. J.of Basic and Applied Sciences, 1(3) (2013) 482-490.   I

Aleya Fardausy,  Md. Alamgir Kabir, Humayun Kabir, M. Mahbubur Rahaman, Khadiza Begum, Farid Ahmed, Md. Abul Hossain, and Md. Abdul Gafur, Study of Physical Mechanical and Thermal Properties of Unidirectional Jute Fiber Reinforced PVC Composites, Int J. of Advanced Research in Engineering & Tech., 3 (2), (2012), 267-274. I

Sammya Afroze,  M. Mahbubur Rahaman, Humayun Kabir, Md. Alamgir Kabir, Farid Ahmed, Md. Abul Hossain, and Md. Abdul Gafur, Optical and Thermal Properties of Graphiteand Talc Reninforced Polyprolene(PP) Composites, Int J. of Scientific  and Technology Research, 1(10), (2012), 68-72. I

Sammya Afroze,   Humayun Kabir, M. Mahbubur Rahaman, Md. Alamgir Kabir, Farid Ahmed, Md. Abul Hossain, and Md. Abdul Gafur, Elastic and Electrical Properties of Graphiteand Talc Reninforced Polyprolene(PP) Composites, Int. J.of Basic and Applied Sciences, 12(5) (2012), 13-16 482-490.I

Nasrin Parveen, Md. Samir Ullah, Md. Forhad Mina, and Md. Abdul Gafur, Structure and Mechanical Properties of High Density Polyethylene Composites: Efffect of organic and inorganic fillers, J. of Bangladesh Academy of Sciences, Vol. 37, No. 11, 11-20, 2013.

Badrun Naher, Md. Mahbubur Rahman Bhuiyan, Humayun Kabir, , Md. Rakibul Qadir, Md. Abdul  Gafur, Farid Ahmed, Study of Mechanical and Physical properties of Palm Fiber Reinforced Acrlonitrite Butadiene Styrene Composites,  Material Science and Applications, 2014, 5, 378-386. I

Kh. Mumtahina Siddiquee, Dr. Maksud Helali, Dr. Abdul Gafur and Soma Chokrborty, Investigation of an Optimum Method of Biodidegradation Process for Jute Polymer Composites, American Journal of Engineering Research(AJER) Vol. 3, Issue-1, pp. 200-206.    I

G M Arifuzzaman, M Abdullah-Al-Mamun, SM Ashraful Abedin, M Joynayed Choudury, MA Gafur and M Shamsul Alam, Renewable Okra Bast Fiber Reinforced Phenol Formaldehyde Resin Composites: Mechanical and Thermal Studies, Research and Reviews: Journal of Material Sciences, Vol. 2, Issue 1, January- March 2014. I

M M Hasan , A Sharif, and Md. Abdul Gafur, Micro-structural and Bulk Materials Properties of Zn-Al Alloys, Int. J. of Science and Adv. Tech., Vol 4 No 1 January 2014, p. 20-27. I

Saumen podder, Mohammad Kamruzzaman, SMA Sujan, M. Hossain, MS Jamal, MA Gafur and Mahfuza Khanam, Effect of Pressure on Lignocellulosic Biomasspellet to Improve Fuel Properties: Higher Heating Value, FUEL, 131 (2014, 43-43). I

Badrun Naher, M A Gafur, Muhammad Abdullah Al-Mansur, Md. Mahbubur Rahman Bhuiyan, Md. Rakibul Qadir, Farid Ahmed, Investigation of the Surface Morphology and  Characterization of Palm Fiber Reinforced Acrylonitrile, Butaiene Styrene (PF-ABS) Composites, Material Science and Applications, 2014, 5, 378-386. I

Humayun Kabir,  Md. Abdul Gafur,  Farid Ahmed, Farhana Begum,  Md. Rakibul Qadir, Investigation of Physical and Mechanical Properties of Bamboo Fiber and PVC Foam Sheet Composites, Universal Journal 2(6), 119-124, 2014.    I

Mohammad Mizanur Rhaman, Sanjida Afrin, Papia Haque, Md. Minhajul Islam, Mohammad Shahidul Islam and Md. Abdul Gafur, Preperation and Characterization of Jute Cellulose Crystals-Reinforced Poly(L-lactic acid) Bio Composites for Biomedical Application, Int. Journal of Chemical Engineering Vol 2014, Article ID 842147. I

Md. Jakir Hossain, M. A. Gafur, M. R. Kadir, and Mohammad   Mainul karim, Prearation of Gelatin-Hydroxyappatite, Composite for Bone Tissue Engineering, Int. Journal Of Engineering and technology, IJET-IJENs Vol. 14, No. 01. I

Jannatul Ferdous, Md.Abdul Gafur, Sujan Kumar Das, Ranjan Shyamal Chokroborty, Md. Mohsin, Arun Kumar Deb, Md. Rakibul Qadir, Study of CuxZn1-xFe2O4 Ferrite Humidity Sensor with and without Napthalene, Sensor Letter, Volume 12, No 9, September 2014, pp. 1353-1360(8). I

M. K. Alam, M.T. Alam, M.F. Mina and M. A. Gafur, Structural, Thermal, and Electrical Properties of Carbon Black Reionforced Polester Resin Composites, Journal of Applied Polymer Science, 113(13), 4042191-11), 2014. I

M. Moazzem Hossain, F.-U.-Z. Chowdury, M. A. Gafur, A. K. M. Hakim, Structural, Mechanical Properties of Zirconia Toughened Alumina (ZTA) Composites, Int. Journal of Engineering Research & Technology, Vol. 3, Issue 2, February 2014. I

M. Moazzem Hossain, F.-U.Z. Chowdury, M. A. Gafur, A. K. M. Hakim, S. Nasrin, Investigation of Mechanical Properties of Al2)3-20Wt5. ZrO2 Composites As A Functionof Sintering Temperature, European  Scientific Journal March 2014 edition, Vol.10 No. 9, p.399. I

M. Moazzem Hossain, F.-U.Z. Chowdury, M. A. Gafur, A. K. M. Hakim, M. Belal Hossain, Effect of Zirconia Substitution On Structural and mechanical Properties of ZTA Composites, IOSR Journal of Mechanical and Civil Engineering, Vol 11, Issue 2, Ver 1 (Mar-Apr. 2014), PP. 1-7. I

A. Hossain, A SW Kurny, M. A. Gafur, Effect of 2 wt% Cu Addition on the Tensile Properties and Fracture Behaviour of Peak Aged Al-6Si-0-5Mg-2Ni Alloy at Various Strain Rates, World Academy of Science, Engineering and Technology, Int. Journal of Chemical, Nuclear, Metallurgical and Materials Engineering Vo: 8, No: 5, 2014.  I

A. Hossain, A SW Kurny, M. A. Gafur, Effect of 2 wt% Cu Addition on the Corrosion Behaviour of Peak Aged Al-6Si-0-5Mg-2Ni Alloy at Various Strain Rates, World Academy of Science, Engineering and Technology, Int. Journal of Chemical, Nuclear, Metallurgical and Materials Engineering Vo: 8, No: 7, 2014. I

Polash Gohose, Md. Abdul Gafur, Sujan Kumar Das, Shymal Ranjan Chokraborty, Md. Mohshin, Arun Kumar Deb, and Md. Rakibul Qadir, Effects of Flux Concentrations and Sintering Temperature on Dental Porcelain, European Physical Journal Applied Physics, Volume 65, Issue 02, 2014, 11 pages.I

Budrun Neher, M. A. Gafur, Md. Mahbubur Rahman Bhuiyan and Farid Ahmed, Physico-Mechanical Properties of Palm Fiber, Jahangirnagar University Journal of Science, Vol. 37, No. 2, pp. 37-48, 2014.I

Md. Mansur Ali, Mohammad Obaidur Rahman, M. A. Gafur, Rakibul Qadir and Robiul Islam, Characterisation of (BaTiO3)1-X(SrTiO3)XSintered at Different Temperature, Jahangirnagar University Journal of Science, Vol. 37, No. 2, pp. 73-82, 2014. I

Mohammad Mizanur Rahman, Sahnjida Afrin, Papia Haque, Md. Minhajul Islam, Mohammed  Shohidul Islam, and Md. Abdul Gafur, Preparation and Characterization of Jute Cellulose Crystall Reiforced Poly(L-Lactic acid) Biocomposites for Biomedical Application, Int. Journal of Chemical Engineering, Volume 2014, Article Id 842147, 7 pages. I

C K Mahmud, Md. Ahsanul Haque, AM Sarwaruddin, M Abdul Ahad, and Md. Abdul Gafur, Preparation and Characterization of Polyester Composites Reinforced with Bleached, Diospyros perigrina(Indian persimmon)  Treated and Unbleached Jute Mat, Advanced Chemical Engineering 2014, Volume 4, issue 3, Page 8. I

Md. Ashiqur Rahman, Md. Abdul Gafur, Md. Abdur Razzaque Sharker, Impact of doping on Structural, Electronic and Optical Properties of Cobalt Ferrite Prepared by Solid-State Reaction, Int. Journal of Innovative Research in Advanced Engineering (IJRAE), Volume 2 Issue 1 (Jan 2015), pp.99-107.  I

Md. Mahfujul Islam, Humayun Kabir, Md. Abdul Gafur, Md. Mahbubur Rahman Bhuiyan, Md. Alamgir Kabir, Md. Rakbul Qadir, Farid Ahmed, Study on Physico-Mechanical Properties of Rice Husk Ash Polester Resin Composite, Int. J. Chemistry, Physics, and Astronomy, Vol. 53(2015), pp 95-105. I

Shimul Kanti Nath,  Nishita Chowdhury, Md.Abdul Gafur, Effect of Co Doping on Crystallographic and Optoelectronic Properties of ZnO Thin Films, Journal of Superconductivity and Novel Magnetism, Vol. 28, Issue 1, pp 117-123, 2015. I

Md.  Abul Hossain, Md. Abdul Gafur, Famida Gulshan and Abu Syed Wais Kurny, Electrochemical Investigation  of the corrosion behavior of heat treated Al-6Si-0.5Mg-xCu(x=0, 0.5 and 1 alloys, J Electrochem. Sci. 5(1), (2015)0-0; doi: 10.5599/jese. 2015.0070. I

M.S. Kaiser, M. A. Gafur and S. Dutta, Recrystallization in Aluminium Engine Block, and Piston, IMSE, Vol. 1, No. 3, p. 103-107. I

T. Al-Mubarak, Md. Forhad  Mina, and M A Gafur, Physico-mechanica;l, Thermal, and Activation Energy Studies of Jute-MAT/PVC Sandwich Composites,  J of Bangladesh Academy of Science Vol. 39 N0. 1, 13-23, 2015.

Mohammad Abdul Wadud, M. A. Gafur, Md. Rakibul Qadir, Effect of Bishmuth Addition on Structure and Mechanical Properties of Tin-9Zinc Soldering Alloy, Material Science and Application, 2015, 6, 792-798. I

H. Ahmad, K. Kumar, M. Nurunnabi, M. A. Alam and M.A. Gafur, Conductive Polyaniline Nanofibre Embeded with Thermally-Responsive Cationic Hydrogel Nanoparticles,  J. of Colloid Science and Biotechnology, Vol. 3, 355-362, 2014. I

Mst. Taslima Akter, Md. Abdul Gafur and Md. Abdur Razzaque Sarker,. (Sodium nonstoichometry effect on the crystal structure, electronic, optical and thermoelectric properties of sodium, Int. J. of Innovative Research in Advance Engg. (IJIRAE) Issue, vol 11 (Nov 2014), pp.123-133. I

F. Khatun, M. A Gafur, MS Ali, MS Islam, MAR Sarker, Impact of Lithium Composition on Structural, Electronic, Optical Properties of Lithium Cobaltite prepared by Solid-state reaction, J. of Scientific Research, Vol. 6 No.2 (2014), 2070-2075. I

AKM Salah Uddin, HM Ferdousi, MA Gafur, Effect of Al Addition on the Microstructural and mechanical Behavior of Bi doped Sn-Zn Alloy, Int. J. of science and Advanced Technology, Vol. 4, No. 10 November 2014, 1-5. I

Md. Nazrul Islam, M.A. Gafur, and Amir Hossain Khan, UV-Visible Spectroscopic Investigation of Short Jute Fiber Reinforced Propylene Composites, National University Journal of Science, Vol. 1, No. 1, 2014, pp. 1-6.

S. Islam, M A Hossain, H. Kabir, M. Rahman, M. S. Bashar, M. A. Gafur, A. Kabir, M. M. R. Bhuiyan, F. Ahmed, N. Khatun, Optical, Structural, and Morphological Properties of Spin Coated Copper Zinc Tin Sulphide Films, Int. J. of Thin Films Science and Technology 4, No. 3, 155-161 (2015). I

MJ Hossain, M.A. Gafur, MM Karim and AA Rana, Mechanical properties of Gelatin-Hydroxyapatite composites for bone tissue engineering, BJSIR, 50(1), 15-20, 2015. I

S. Yasmin Priya, GM Arifuzzaman Khan, M. Helal Uddin, M. Ahsanul Haque, M. Shahrul Islam, M. Abdullah-Al-mamun, M A Gafur and M. Shamsul Alam, Characterization of Micro-fibrillated Cellulose Produced from sawmill Westage: Crysllinity and Thermal Properties, American Chemical Science Journal, 9(1):1-8, 2015. I

Rahima Nasrin, M.A. Gafur, AH Byuiyan, Characterization of Isotactic Polypropylene/Talc Composites Prepared by Extrusion Cum Compression Molding,   Material Science and Application, 2015, 6, 925-934. I

Ismat Zerin Luna, Krishna Chandra Dam, AM Sarwarudding Chowdhiury, Md. Abdul Gafur, Nuruzzaman Khan, Ruhul A Khan, Physical and Thermal Characterization of Alkali Treated Rice Husk Ash Reinforced Polypropylene, Advances in Materials Science and Engineering 01/2015; 2015(1):1-7. I

Md. Mamurur Rashid, Sabrin A Samad, M A Gafur, AM Sarwaruddin, Study of Different Chemical Treatment for the Suitability of Banana (Musa oranta) Fiber in Composite Materials, , Int. J. of Scientific and Industrial Research, 04/2015, 6(4): 1870-1875. I

Ismat Zerin Luna, Lutfun Naher Hilary, AM Sarwaruddin Chowdhiury, M.A. Gafur, Nuruzzaman Khan, Ruhul A Khan, Preparation and Characterization of Copper Oxide Nanoparticles Synthesis via Chemical Precipitation Method, Open Access Library  Journal, 2, 2015, pp.1-8. I

MA Wadud, M A Gafur, M. R. Qadir, MO Rahman, Thermal and Electrical Properties of Sn-Zn-Bi Ternary Soldering Alloy, Material Science and Application, 2015, 6, 1008-1013. I

Md. Hasan Mahmud, Kazi Abdus Salam, M A Gafur, Ashequl Alam Rana, Md. Rakibul Qadir, Shah Md. Masum, Mithun Sarker, and Mohammed, and Mohammed Mainul Karim, Chemical Characteristics of Hydroxyapatite from Oyster Shell by Thermo-chemical Process, Int. J. of  Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 7, July 2015. I

GM Arifuzzaman Khan, Hamid Shaikh, M Shamsul Alam,  MA Gafur, Saeed  M. Al-Zahrani, Effect of Chemical Treatments on the Physical Properties of Non-woven Jute/PLA Biocomosites, BioResources 10(4), 2015, 7386-7404. I

Rahima Nasrin, AH Bhuiyan, Influence of Talc Filler Content on the Mechanical and DC Electrical Behavior of Compression Molded Isostatic Polypropelene Composites, Int. Journal of Composite Materials, 2015, 5(6): 155-161. I

Ismat Zerin Luna, Krishna  C. Dam,  AM Sarwaruddin Chowdhiury, M.A. Gafur, Ruhul A Khan, Mechanical and Spectroscopic Properties of Rice Husk Reinforced Polypropelene Composites; Effect of Sodium Hydroxide, Int. Journal of Composite Materials, 2015, 5(6): 161-166. I

Md. Aminul Islam, M. A. Gafur, M. Saidul Isaml, Sintering Characteriistics of La/Nd doped Bi4Ti3)12 Bismuth Titanate  Science of Sintering , 47 (2015) 175-186.

Md. Aminul Islam, Muhammad saidul Islam, M. Abdul gafur, Synthesis and Characterization of La and Nd Co-doped Bismuth Titanate ferroelectric Ceramics, In. J. Appl. Ceramic. Technol. 1-6(2015). I

Sabrin A Samad, Abul A. Arafat, M. A. Gafur and A. M. Sarwaruddin Chowdury, Characterization of scaffold Prepared by Blending nanobioactive glass and Graphene oxide-Gelatin Hydrogel Solution for Bone Tissue Engineering, Journal of Biomaterials Vol. %, 1-8, 2015. I

Ismat zerin, Luna, AM Sarwaruddin Chowdhury, M.A. Gafur, Ruhul A. Khan, Measurement of Forced Convection heat Transfer Coefficient of Low volume Fraction CuO-PVA Nano-fluids under laminar Flow Condition, American Journal of Nanomaterials, 2015, vol. 3, No.2 64-67. I

MH Doha, MJ Ahmed, J. rabeya, KAM Siddiquee, S. Hussain, O. Islam, MA Gafur, S. Islam, N. Khatun, SH Sarker, Charcterization of Chemically deposited ZnS thin film on bare and conducting glass, Optik-Int. J. for light and electron Optics, Vol. 126, Issue 24, December 2015, p. 5194-5199.  I

MJ Hossan, MA Gfaur, MM Karim, and AA Rana, Mechanical Properties of Gelatin-Hydroxy Appatie, Bangladesh J. Sci. INd. Res. 50(1), 51-20, 2015.

J.D. Afroze, MJ Abden, M.S. Alam, N.M. Bhadur, M.A. Gafur, Material Letters 169 (2016) 24-27.????? I

Tarfi Aziz, Shah Md. Masum, md. Rakibul Qadir, Abdul Gafur, and Dilruba Huq, Physicochemical Characterization of iron Oxide nanoparticle Coated with Chitosan for Biomedical Application, int. Res. J. of pure & Applied chemistry, 11(1):1-9, 2016. I

Chowdury Kaisar Mahmud, Md. Asanul Haque, AM Sarwaruddin Chowdury, Mohammad Abdul Ahad and Md. Abdul Gafur, Perparation and Characterization of Polyester Composites reinforced with Bleached, Diospyros pergrina (inan persimmon) Treated and Untereated Jute mat, Adv. Chemical Engineering, 2014,  Vol. 4, Issue 3, 8pages. I

Badrun Naher, Md. Mahbubur Rahaman, Huamy Kabir, Md. Abdul Gafur, Md. Rakibul qadir, farid Ahmed, Thermal Properties of palm fiber and palm fiber-reinforced ABS composites, J Therm Anal Calorim, Springer, Published on line 19 February 2016.DOI 10.1007/s10973-016-5341-x. I

Md. Mamunor Rashid, Sabrina A. ahmed, M.A. Gafur, Md. Rakibul Qadir, and AM Sarrwaruddin,  Chowdhury, Effect of Hydrophobic Grade Bababa (Musa oranata) Bark Fiber on the physicomechanical Properties of Isotactic Polypropylyene, Int. Jo of Pol. Science, Volume 2016, Article ID901795. I

ShahidaYeasmin, Mrinal Kanti Kabiraj,  Badhan Shaha, Md. Rakibul Qadir, Md. Abdul Gafur and Shah Md. Masum, Chromium (VI) Ions Removal From Tannery Effluent Using Chitosan-Microcrystalline Cellulose Composite As Adsorbent,International Research Journal of Pure & Applied Chemistry 10(4): 1-14, 2016, Article no. IRJPAC.23315. I

H. Ahmed, MS Sultana, MA Alam, MM Rahman, K. Tauer, M. A Gafur, KS Sharafur, Evluating a simple approach to prepare magnetic and stimuli-responsive composite hydrogel, adirparticles for application in biomedical field, Express polymer Letters Vol. 10 No. 8, (2016), 664-668. I

MKH Bhuiyan, MA Gafur, MNI Khan, AKM Akhter Hossain, Microstructural and Dielectric Characteristics of Sr doped Ba(Fe0.5Ta0.5)O3Ceramics, The IJES, Vol 5, Issue 4, 2016, pp.49-56. I

Hasan Ahmed, Mohammad Mustafizur Rahman, Mohammad Azgar Ali, Hideto Minami, Klaus Tauer, Mohammad Abdul Gafur, Mhammad Mhabubor Rahaman, A simple route to synthesize conductive stimuli-responsisve polypyrrole Nanocomposites hydrogel particles with strong magnetic properties and their performance fot removal of heaxavalent chromium from aqueoussolution, J. of Magnetism and Magnetic Materials, 412(2016)15-22. I

MR Hassan, MA Gafur, AA Rana, MR Qadir, SM Masum, AM Sarwaruddin Chowdury and MM Karim, Characterization of jute and glass fiber reinforced polyester based hybrid composites, Bangladesh J.Sci. Ind Res 51(2), 81-88, 2016. I

MKH Bhuiyan, M A Gafur, MNI Khan and AKM Akhter Hossain,Microstructural and Dielectric Characterization of Sr doped Ba(Fe0.5Ta0.5)O3 Ceramic, The Int. J. of Engg. And Sci. (IJES), Vol. 5, Issue 4, pp.49-56, 2016. I

Sadia Tasnim Mowri, MA Gafur, Quazi Delwar Hossain, Aninda Nafis Ahamed, Muhammad Sharier Bashar,Structural and Dielectric Properties of (Bi203Fe2O3)0.4(Nb2O5) for Different Sintering Temperature,  Material Sciences and Application, 2016, 7, 421-429.

Sadia Tasnim Mowri, MA Gafur, Quazi Delwar Hossain, Aninda Nafis Ahamed, Muhammad Sharier Bashar,Structural and Dielectric Properties of (Bi203Fe2O3)0.4(Nb2O5) for Different Sintering Temperature,  Material Forum, Vol.883, pp3-6.

Roisul Hasan Galib, Ahmed Sharif, M.A. Gafur, Md. Rakibul Qadir, Md. Ashif Anwar,and Md. Abdul Aziz Antor, Mechanical Properties of Zn-xMg Solder Alloys, Applied Mechanics and Materials, Vol. 860, 2016,pp.173-178.doi:10.428. www.scientific.net/AMM.860.173.

Hasan M. Usama, Ahmed Sharif, M.A. Zubair, M.A. Gafur, and Sheikh Monjura Hoque, Structaral transition and its Effectin La, Zr co-subtituted mono-domain BiFeO3, J. of Applied Physics 120, 214106(2016); doi: 10:1063/1.4969047.

MKH Bhuiyan, M.A. Gafur, MNI Khan, AA Momoin, AKM Akhter Hossain, Correlation of Structural, Dielectric, Magnetic and magnetoelectric Properties of Ca1-x Srx(Fe0.5Ta0.5)O3 Mageneto-ferroic Ceramics, Materials Science and Application, 2017, 8 64-84.

Mehnaz Rashid, M.A. Gafur, Mostafa Kaiyum Sharafat, Hideto Minami, Mohd. Abdul Jalil Miah, Hasan Ahmed, Biocompatible microcrystalline  cellulose  particles from cotton wool and magnetization via a simple in situ co-precipitation method, Carbohydrate Polymers, 170 (2017) 72-79. www.elsevier.com/locate/carbpol.

Muhammad Yusuf  Miah, Shovon Battachearjee, Ayesha Begum, Shukanta Bhowmic,  Md. Saiful Islam, Abdul Gafur, Md. Sydul Islam, Fabrication and Characterization of Differently laminated Jute Mat-PVC Composites, MAYFEEB Journal of Matrials Science-ISSN 231-871 Vol1 (2017)-pp. 28-40.

Gafur MA, Sarker MSR, Alam MZ, Qadir MR,Effect of 3 mol% Yttria Stabilized Zirconia Addition on Structural and Mechanical Properties of Alumina-Zirconia Composites,Materials Sciences and Applications, 2017, 8, 584-602 http://www.scirp.org/journal/msa ISSN Online: 2153-1188 ISSN Print: 2153-117X DOI10.4236/msa.2017.87041  July 24, 2017.

 

Surface Properties Modification of Zirconia Toughened Alumina by Using Titania Additives,  Colloid and Surface Science 2017; 2(1): 1-5 http://www.sciencepublishinggroup.com/j/css doi: 10.11648/j.css.20170201.11.

 

Mahmood AA, GafurMA, HoqueEmdadul, E?ect of MgO on the physical, mechanical and microstructural properties of ZTA-TiO2 composites, Materials Science & Engineering A 707 (2017) 118-124.

 

 

Sultana N, Bilkis K, Azad R,Qadir MR, Gafur MA and. Alam MZ, Yttria stabilized tetragonal zirconia ceramics: preparation, characterization and applications, Bangladesh J. Sci. Ind. Res. 53(2), 111-116, 2018.

 

Nath MN, Ahmed AN, Gafur MA, Miah MY,  Study on The Rietveld Analysis for Synthesis Zinc Oxide Nanoparticles, AIP Conference Proceedings 1980 (AIP

Publishing), 030012 (2018); doi: 10.1063/1.5044291.

 

WadudMA, Gafur MA, Qadir MR, Rahman MO, ,

 

 

Development of Thermal Properties and Surface Morphology Poly(L-lactic)/Chitosan Blend with Microcrystalline Cellulose Obtained from Natural Jute Fibe, Int. Res. J. of Pure and Applied Chemistry, 15(4): 1-8,2017, Article no. IRJPAC.39549

 

Hosen MS, Rahman MH, Gafur MA, Habib R and Qadir MR, Preparation and Characterization of Poly (L-lactic acid)/Chitosan/Microcrystalline Cellulose Blends, Chemical Science International Journal, 21(2): 1-10, 2018, Article no. CSIJ.39534

 

 

Hossain T, Alam M A., Rahman MA., Sharafat MK., Minami H,Gafur MA, HoqueSM, Ahmad Hasan,Zwitterionic poly(2-(methacryloyloxy) ethyl phosphorylcholine) coated mesoporous silica particles and doping with magnetic nanoparticles, Colloids and Surfaces A, 555 (2018) 80-87.

 

TanjimM, Rahman M A,. Rahman M. M,. Minami H, Hoque S. M., Sharafat M. K., Gafur MA and Ahmad H., Mesoporous magnetic silica particles modified with stimuli-responsive P(NIPAM-DMA) valve for controlled loading and release of biologically active molecules, Soft Matter, 2018, DOI: 10.1039/C8SM00560E.

 

 

ShabnamR, RahmanMA, MiahMAJ., SharafatMK, IslamHMT, RahmanMM, Gafur MA, Ahmad H, Fabrication of Epoxide Functional Hydrophobic Composite Polymer Particles by Suspension Polymerization and Subsequent Doping with Fe3O4 Nanoparticles, JOURNAL OF  SCIENTIFIC RESEARCH, J. Sci. Res. 9 (3), 329-339 (2017).

 

Shabnam R, Rahman MA,Miah MAJ, Sharafat M K., Hasan MTI, Gafur MA., and Ahmad Hasan,Novel Magnetically Doped Epoxide Functional Cross-linked Hydrophobic Poly(lauryl methacrylate) Composite Polymer Particles for Removal of As(III) from Aqueous Solution, DOI:10.1021/acs.iecr.7b01741 Ind. Eng. Chem. Res. 2017, 56, 7747-7756.

 

 

Rashid M,GafurMA,Sharafat MK, Minami H, Miah MAJ, Ahmed , Biocompatible Microcrystalline Cellulose Materials from cotton wool and magnetization, via a simple in-situ co-precipitation method, Carbohydrate Polymer, 170, 2017, 72-79.

 

MatinR, Bashar MS, Sultana M, Ahmed AN, and Gafur MA, Annealing Effects on the Structural, Optical and Electrical Properties of Chemically DepositedCdS Thin Films using NH4Cl ComplexingAgent, International Journal of Nanoelectronics and Materials, Vol. 11, No. 2 Apr 2018.

 

 

Mithun Rani Nath, AnindaNafis Ahmed, M. A. Gafur, Muhammed Yusuf Miah &Shovon Bhattacharjee (2018): ZnO Nanoparticles Preparation from Spent Zinc-Carbon Dry Cell Batteries: Studies on Structural, Morphological and Optical Properties, Journal of Asian Ceramic Societies, DOI: 10.1080/ 21870764.2018. 1507610.

 

Taimur-Al-Mobarak, M. F. Mina, M. A. Gafur, A. N. Ahmed, and S. A. Dhar, "Effect of ChemicalModifications on Surface Morphological, Structural, Mechanical, and Thermal Properties of Sponge-gourdNatural Fiber", Fibers and Polymers (Springer), 2018, Vol-9, No-1, 31-40.

 

Roy S K, Khan GMA,  Haque MA, Alam MS, Haque MI, Gafur MA, Effect of Chemical Treatments and Coupling Agents on the Properties of Unidirectional Jute Fiber Reinforced Polypropylene Composite, JurnalKejuruteraan 29(2) 2017: 63-70.

 

 

Shathi IJ, Hosaain M, Gafur MA, Rana MS, and Shamsul MS, A comparative study of Microleakage between giomer and ormorcer, restoration in class I cavity of first permanent premolar teeth in VIVO, BSMMU Journal, vol. 10, No. 4, 2017.

 

Nandita Chakrabarty Jhumur, Shashwata Chakrabarty, M A Gafur and Mohammad Abdul Motalab,Comparative Study of Mechanical Properties of PP, LDPE and EVA at Different Molding Temperatures, AIP Conference Proceedings 1980, 030007 (2018); doi: 10.1063/1.5044286,View online: https://doi.org/10.1063/1.5044286.

 

TaTaimur Al-Mobarak, Mina MF and Gafur MA, Material properties of sponge-gourd fiber-reinforced polylactic acid biocomposites: Effect of fiber weight ratio, chemical treatment, and treatment concentrationsJournal of Thermoplastic Composite Materials 1-28, sagepub.co.uk/journalsPermissions.navDOI: 10.1177/0892705718772880 journals.sagepub.com/home/jtc

 

Conference Proceedings

S/N

Publishing Year

Description

CP-1-49

1996-2016

M. A. Gafur, M. Nasrul Haque and Deena Ferdous,  Computation of Solidification  Time of Al in Cast Iron Semi-infinite Mold Considering Imperfect Contact between Casting and Mold, Proc. 3rd Annual Paper Meet, The IEB, Me Engg. Division. 31 Oct-2 Nov. 1996, Paper 12, p. 90.

M. A. Gafur and M. Nasrul Haque, Effect of Process variables on Solidification Time of  Zinc and  Copper, Proc. The 1st Annual paper Meet, '94, BIT, Khulna, Oct 26-29, 1994,  p.384.

M. A. Gafur and M. Nasrul Haque, The Effect of Casting Thickness and Superheat on the interfacial Heat Flux and Solidification Time of Aluminium  Casting in Cast Iron Mold, Proc. 2nd APM, The IEB, Mech. Engg. Div. Sept. 28-30, 1995, Rajshahi, Paper No. 17, p. 136.

M. A. Gafur and M. Nasrul Haque, Computation of Solidification Time of Zinc in Cast Iron Semi-Infinite Mold Considering Imperfect Contact between Casting and Mold, Porc. 19th Bang. Sci. Conf. Part-2: p. 455,1996  presented and awarded for best presentation under Sec XII, Jahangirnagar University, Savar, Dhaka, Bangladesh, 29-31 October, 1996.

M. A. Gafur and M. Nasrul Haque, Comparative Computation of Solidification Time of Al in Semi-infinite Sand Mold and Cast Iron Mold Considering Imperfect Contact Between Casting and Mold, Int Proc. on Structure, Processing and Properties of Materials, SPPM '97, 15-17 November, 1997, Dhaka, Paper No. Prc. 8 C71.

M. A. Gafur and M. Nasrul Haque, The Effect of Casting Thickness and Superheat on the interfacial Heat Transfer Coefficient and Solidification Process of Al Casting in Cast Iron Mold, Int. Proc. on Structure, Processing and Properties of Materials, SPPM '97, 15-17 November, 1997, Dhaka, Paper No. Prc.12  C110.

M A Gafur, M.N. Haque, M Ahmed, M K Hasan, and P. K. Das, Effect of  Firing Temperature on the Properties of High Silica Insulating Bricks Produced from Rice Husk Ash, Proc. 6th Annual Paper Meet and Int. Conf. on Mechanical Engineering 17-19 Feb 2000. p. 142.

M A Gafur and M Nasrul Haque, Effects of Casting Variables on Interfacial Heat Transfer for Bar Shaped Commercially Pure Aluminium  Casting, p. 651, Proc. Of BSME-ASME International Conf. Thermal Engineering, 31 December 2001-2nd 2002, Dhaka, Bangladesh.

M A Gafur and M Nasrul Haque , Effects of Casting Variables on Interfacial Heat Transfer for Plate Shaped Commercially Pure Al Casting, p. 651, Proc. Of International Conf. on Manufacturing, ICM2002, 09-11 August, 2002, Dhaka, Bangladesh.  I

M A Gafur, AKM Aziz Ahmed and M Nasrul Haque , Effect of clay addition on refractory brick from Rice Husk Ash,  p. 151, Proc. 3th International Mechanical Engineering Conference and 8th APM on E-manufacturing  20-22 March, 2003, IEB, Dhaka.

HMMA Rashed, MA Islam, FB Rizvi and MA Gafur, Effects of Process Parameter on Flexural Strength of Jute Fibers Reinforced Thermoplastic Components p. 184, Proc. 4th International Mechanical Engineering Conference and 9APM 29-31 December, 2004, IEB, Dhaka. I

S. Mojura Haque, M. A. Hakim,  F. A.  Khan, and M A Gafur, Crystallization Behavior and magnetic Softness of Devitrified Fe-Based Metallic Glasses, 9th Asia Pacific Phy. Conference (9th APC), Henoi, Vietnam, Oct. 25-31, 2004. I

M A Gafur and M. M. Rashid, Natural Fiber Reinforced Polymer (Coir-High Density Polyethylene) Matrix Composites-Fabrication, Process Parameters and Properties, 2nd BSME-ASME Int Conf. on Thermal Engineering, 2-4 Jan 2004, p. 1078. I

M A Gafur, M N Hasan and Akram Hossain, Natural fiber-Polymer (Jute-LDPE) Matrix Composites-Its Fabrication, Process parameters, and Properties,  Proc. 3rd Int Cof. On Mech. Engg.  And 8th APM, 20-22March 2003, Mech Engg. Div. 2005, Dhaka, Bangladesh, p. 163.

M. A Gafur, S. Sharma, and MD. AH Buiyan, PVC-Sawdust Composites- Fabrication, Process parameters and Properties, Proce. 5th Int Mech. Engg. Comf. And 10th APM, 30 Sept -2 Oct 2005, Mech Engg. Div. 2005, Dhaka, Bangladesh, p. 111.

M. Nazrul Islam, MA Gafur and Amir Hossain Khan, Ultraviolet-Visible spectroscopic Investigation, of Short Jute Fiber Reinforced Polypropylene Composites, Proc. of the 5th IMEC and 10th APM, IEB, 30 Sep -2 October, 2005, Dhaka, p.129. I

Md. Asad, Md. Nazrul Islam and M A Gafur, PP-Coir Composites-Its Fabrication, Process parameters and Properties, 3rd BSME-ASME Int. Conf. on Thermal Engineering, 20-22 December, 2006, paper No-BA-154. I

Halima Akhter, MA Gafur and Abu Hoshain Bhuiyan, Palm Fiber Reinforced PVC Composites- Fabrication, Process parameters and Properties, Proc. of 3rd BSME-ASME Int Conf. on Thermal Engineering, 20-22 December, 2006, paper No-BA-155. I

M. Maniruzzaman, S M Hafiz Uddin, and M A Gafur,  A Preliminary Study on the Properties of Agave Cantala Natural Fiber-PP, High Performance Filler 2007,  Hamburg, Germany Paper-21C. I

H. Akter, MA Gafur and Md. AH Bhuiyan, Electrical Properties of Palm Fiber Reinforced PVC Composites, Proc. 4rth BSME-ASME Int Conf. on Thermal Engineering, 27-29 December, 2008, paper No-134, p.165. I

M A Gafur, H. Akther, S Sharma and AH Bhuiyan,  Thermal Properties of Natural  Fiber Reinforced PVC Composites, Proc. 4rth BSME-ASME Int Conf. on Thermal Engineering, 27-29 December, 2008, paper-147, No-.p.165. I

Salma A. Iqbal, and MZ Hossain, MA Gafur, Development of Jute-Polyester Composites and Characterization of Its Different Properties by Changing Process Parameter, Proc. of International  Conf. on Ch. Engineering 2008, ICChE2008, 1-2 January, 2009, Dhaka-Bangladesh. I

Md. Hafezur Rahman and  MA Gafur, Short Natural Fiber Reinforced Low Density Polyethylene composites; Effects of Fiber Loading, Proceedings Int. Workshop on Tools, Implant and bio Materials, 17-18 May, 2012, PP&PDC, p.93-100. I

M.A Gafur, Most Hoseney Ara Begum, and Rakibul Qadir,  DMTBI's  Facility for Reverse Engineering : Production of Piston Pin-a case Study. Presented Int. Workshop on Tools, Implant and bio Materials, 17-18 May, 2012, PP&PDC, p.71. I

MM Islam, MA Gafur, F.-U.-Z. Chowdury, An investigation on the pure and Alkali metal Halide  Doped Potasium Dihydrogen Phosphate Crystal, Presented as Poster,  Int. Workshop on Tools, Implant and bio Materials, 17-18 May, 2012, PP&PDC, Proceedings.P.73-81. I

MM Hossain, MA Gafur, MA Hakim, and F.-U.-Z. Chowdury, Presented as Poster,  Int. Workshop on Tools, Implant and bio Materials, 17-18 May, 2012, PP&PDC, p.82. I

Afsana Sharmin, Fahmid Parvin, Enamul haque, M Ahmed Khan, MA Gafur and Jahid MMI, Electrical Thermal and Mechanical characterization of Chitosan-Na Bentonite Clay Composite,  Presented as Poster,  Int. Workshop on Tools, Implant and bio Materials, 17-18 May, 2012, PP&PDC, Proceedings, p.82. I

Nasrin Parvin, M. Samir Ullah, M. Forhad Mina, and MA Gafur, Characterization Carbon Black Reinforced High Density Polethylene Composites, Presented as Poster,  Int. Workshop on Tools, Implant and bio Materials, 17-18 May, 2012, PP&PDC, Proceedings, p.102. I

Md. Azizar rahman, ASW Kurny and MA Gafur, Recovery of Alumina from Fly Ash, Presented as Poster,  Int. Workshop on Tools, Implant and bio Materials, 17-18 May, 2012, PP&PDC, Proceedings, p.103.I

Rajia Sultana, Rafia Akter,  Md. Rakibul Qadir, M H Ara Begum, Md. Abdul Gafur, Md Zahangir Alam,  Fabrication  and Characterization of Porcelain and Sand Reinforced Polyester Composites, Presented as Poster,  Int. Workshop on Tools, Implant and bio Materials, 17-18 May, 2012, PP&PDC, Proceedings, p.104.I

Rafia Akter,  Rajia Sultana, Md Zahangir Alam, Md. Rakibul Qadir, M H Ara Begum, Md. Abdul Gafur, Fabrication and Characterization of Natural Fiber Reinforced Polyester Composites, Presented as Poster,  Int. Workshop on Tools, Implant and bio Materials, 17-18 May, 2012, PP&PDC, Proceedings, p.104. I

MA Gafur, S. Shaha, MR.Qadir, J. Ferdaus, SA Urmi, and FN Robel, Light Weight Insulating Bricks From Coal and Clay, MK Hossain, MA Kabir, MA Gafur, MA Hossain, F. Uddinn and H Kabir, Recycled High-Density Polyethelene Composites Reinforced with Jute-mat Fiber: Preparation and Characterization, , ICPSDT-2015,  Dept. of Physics, CUET, Books of Abstract, PP-34, p.131. I

Sajib Aninda Dhar, Debashish Roy, M. A. Gafur, and Most. Sheuli Khatu, Study of the Mechanical, Physical and Thermal properties of Coconut Spathe Fiber Reinforced Unsaturated Polyester Composites, 3rd Int. Conf. Mechanical Engineering and renewable Energy, Book of Abstract, P. 115, Proceedings ICMERE 2015 26-29 Nov., 2015, CUET, Chittagong, Bangladesh, Session III-B, Paper No. 242. I

Sadia Tasnim Mowri, MA Gafur, Quazi Delwar Hossain, Aninda Nafis Ahamed, Muhammad Sharier Bashar,, Effect of Sintering Temperature on (Bi2O3Fe2O3)0.4(Nb2O5Nd2O3)0.6, 11th International  Forum on Strategic Technology 2016, 1-3 June, 2016, Novosibirsk State Technical University, Russia.

Sadia Tasnim Mowri, MA Gafur, Quazi Delwar Hossain, Aninda Nafis Ahamed, Muhammad Sharier Bashar,, Synthesis and Characterization of Nb-doped bismuth ferrite, Int. Union of materials Research Societies- Int. Conf On Electronic Materials(IUMRS-ICEM 2016) Int. 4 to 8 July, 2016 at SUNTECG, Singapore.

Md. Hafezur Rahman, M.A. Gafur, M.R. Qadir, and Md. Ariful Islam,  , Poly(Lactic Acid)/Chitosan Blends: Preparation, Characterization, and Antibacterial Activity, 1st Int. Conf. on Engineering Materials and Metallurgical Engineering, ICEMME, 22-24 December 2016, PP&PDC, BCSIR, Dhaka, Bangladesh. P. 50-57. PID-019. www.icemme.com  PID-027, www.icemme.com.

Md. Hafezur Rahman, M.A. Gfaur, Md. Hassanuzzaman, Rasel Habib, SA Dhar, and Md. Sagor Hossen, Poly(Lactic Acid)/Chitosan Blends: Preparation, Characterization, and Antibacterial Activity, 1st Int. Conf. on Engineering Materials and Metallurgical Engineering, ICEMME, 22-24 December 2016, PP&PDC, BCSIR, Dhaka, Bangladesh. P. 50-57. PID-028,www.icemme.com

Rabeya Akter, M.A. Gafur, Nafis Ahmed, Badrun Naher, Md. Mahbubur Rahman, Farid Ahmed, Study of Thermal and Electrical Properties of Coconut Spathe, Fiber Reinforced Obsolete Polymer Composites, 1st Int. Conf. on Engineering Materials and Metallurgical Engineering, ICEMME, 22-24 December 2016, PP&PDC, BCSIR, Dhaka, Bangladesh. P. 81-89. PID-041,www.icemme.com

Julia Khanam, M.A. Gafur, GM Arifuzzaman, JA Faisal Md. Shamsul Alam, Waste Bamboo Fiber as a Potential Resource for Cellulose Acetate Preparation,  1st Int. Conf. on Engineering Materials and Metallurgical Engineering, ICEMME, 22-24 December 2016, PP&PDC, BCSIR, Dhaka, Bangladesh. P. 95-100. PID-048,www.icemme.com

M. Mahmudur Rahman, M.A. Gafur, GM Arifuzzaman, JA Faisal, M. Hassanuzzaman,  Md. Shamsul Alam, SM Abdur Razzaque, Effect of Chemical Treatment of Sawdust on the Interfacial and Mechanical Properties of Polypropelene Composites, ,  1st Int. Conf. on Engineering Materials and Metallurgical Engineering, ICEMME, 22-24 December 2016, PP&PDC, BCSIR, Dhaka, Bangladesh. Pp. 101-.? PID-049,www.icemme.com

MKH Bhuiyan, MA Gafur, MR Qadir, MNI Khan, AA Momin, MAS Karal, AA Momin, and AKM Ahkter Hossain, Investigation of Structural, Elemental Analysis, and Electrical Modulous of Ba0.7Sr0.3(Fe0.5Ta0.5)O3 Multiferroic Materials, 1st Int. Conf. on Engineering Materials and Metallurgical Engineering, ICEMME, 22-24 December 2016, PP&PDC, BCSIR, Dhaka, Bangladesh. P.?. PID-058,www.icemme.com

Md. Khairul Islam, Md. Arifur Rahman Khan, Toufiq, Aninda Nafis Ahmed, and MA Gafur, Fabrication and Characterization of Zn-xSb Alloys as Candidate to Replace Pb Based Solder Alloys,  1stInt. Conf. on Engineering Materials and Metallurgical Engineering, ICEMME, 22-24 December 2016, PP&PDC, BCSIR, Dhaka, Bangladesh. P.?. PID-071,www.icemme.com

Abul Hossain, M.A. Gafur, Fahmid Gulshan, and ASW Kurny, Effects of Heat Treatment on Wear Properties of Al-6Si-0.5Mg-xCu(x=0,0.5,1,2,&$wt%) under Dry Sliding Condition, 1st Int. Conf. on Engineering Materials and Metallurgical Engineering, ICEMME, 22-24 December 2016, PP&PDC, BCSIR, Dhaka, Bangladesh. P.?. PID-079,www.icemme.com.

Sadia Tasnim Mowri, MA Gafur, Quazi Delwar Hossain, Aninda Nafis Ahamed, Muhammad Sharier Bashar , Effect of Sintering Temperature on Structural and Dielectric Properties of (Bi2O3Fe2O3)0.8(Nd2O3)0.2, 1st Int. Conf. on Engineering Materials and Metallurgical Engineering, ICEMME, 22-24 December 2016, PP&PDC, BCSIR, Dhaka, Bangladesh. P.?. PID-087,www.icemme.com.

M.A. Wadud, MA Gafur, M.R. Qadir and M.O. Rahman, Study of the Aluminium Addition on the Physical and Mechanical Properties of Tin-9Zinc Soldering Alloy, 1st Int. Conf. on Engineering Materials and Metallurgical Engineering, ICEMME, 22-24 December 2016, PP&PDC, BCSIR, Dhaka, Bangladesh. P.?. PID-091, www.icemme.com.

Md. Abdullah Al Mahmood, M.A. Gafur, M.E. Hoque, M.R. Qadir, and Muhammad Shariar Bashar, Effect of MgO Addition on the Physical and Fructure Behaviour of Zirconia Toughened Alumina,  1st Int. Conf. on Engineering Materials and Metallurgical Engineering, ICEMME, 22-24 December 2016, PP&PDC, BCSIR, Dhaka, Bangladesh. P.?. PID-109, www.icemme.com.

Taimur-Al_Mubarak, M.F. Mina, M.A. Gafur, A.N. Ahmed and S.A. Dhar, Improv